Before applying a micro tiller, it is necessary to master the structure, characteristics, and usage instructions of the equipment. Only by having a certain level of mastery can one be proficient in the application. However, when applying, one will encounter the problem of shifting gears. Only by having a certain level of mastery of the micro tiller's shifting can one avoid common faults during shifting. So, what is the knowledge structure diagram about the shifting of micro tillers?
First, shake the accelerator pedal lever on the guardrail wall of the micro tiller to the low gear position, and drive the main clutch to operate the longitudinal rod to the "disengaged" position. Rotate the joystick of the accelerator pedal to the low gear position, drive the main clutch operating handle to the "reverse" position, and gradually release the clutch joystick with your hand afterwards.
However, when maintaining the reverse gear technology of the micro tiller, it is not necessary to turn the accelerator pedal of the micro tiller to a low speed, and the standing position of the operator should also try to avoid the rotary tiller as much as possible. When gripping the reverse gear door handle of the micro tiller tightly, the shift position should be in neutral. When shifting gears, disconnect the clutch, grip the clutch handle tightly with your right hand, reverse gear tightly with your left hand, and slowly release the clutch handle with your hand. However, it is necessary to control the steering speed well and not suddenly release the clutch handle of the micro tiller.
